 |
 |
|||
|
||||
 |
 |
Archive corporation
 |
Scheda |  |
|
Fotografie | |
 |
Documentazione |  |
|
Recupero | |
150MB 1/4" Tape DriveSun-4/330/370/390/470/490
|
| 370-1205 | 370-1206 | 370-1218 | 370-1246 |
| Archive 2150S Half-Height Black Bezel |
Archive 2150S Full-Height Black Bezel |
Archive 2150S Half-Height Custom Bezel |
Archive 2150S Full-Height Lt Grey Bezel |
Rear View
Flex Cable
 |
In the Desktop Tape Pack, remove the SCSI ID jumpers, orient the Flex Cable as shown, and plug it into the SCSI ID jumper block. |
Address Select Switch Cable
 |
In the External Storage Module, orient the Address Select Switch Cable as shown, and plug it into the SCSI ID jumper block. |
Power
- 0.7 Amps @ +5Vdc
- 1.5 Amps @ +12Vdc
- 21.5 Watts
Jumper Settings
| JUMPER | SETTING | DESCRIPTION | USAGE |
| RXD/TXD | Out | Serial Port | Not used |
| DIAG Parity |
Out Out* |
Normal/Diag Parity check |
Not used Not used |
| CF2,CF1,CF 0 | In | Disconnect Transfer Size | Size = 32K |
| JUMPER | TARGET 2 | TARGET 3 | TARGET 4 | TARGET 5 |
| ID2 | Out | Out | In | In |
| ID1 | In | In | Out | Out |
| ID0 | Out | In | Out | In |
| 1st SCSI | st3 | st2 | st0 | st1 |
| 2nd SCSI | st7 | st6 | st2, st4 | st3, st5 |
* IN for 370-1246
Note
- The Cartridge Tape part number is 370-1203-01.
Reference
- 150MB 1/4-Inch Cartridge Tape Drive Configuration Manual for the 56-Inch Data Center Cabinet, 813-2076.
Last updated: December 2, 1996
| Questo e' un MUSEO : il materiale visibile nelle foto o elencato in queste pagine NON e' in vendita. Se avete necessita' di qualche macchina o qualche parte, tutto quello che possiamo fare e' aiutarvi a riparare la vostra oppure a trovarne una funzionante. | |||||||||||||
|
|||||||||||||
|
|
|
|
![[Valid RSS]](/rimg/valid-rss.png "Validate my RSS feed")